FAQ on 4G LTE Cellular Hunting Trail Camera
A. Camera can not detect small animal.
Solution: Please use High PIR sensitivity
B. It seems that camera has much slower trigger speed.
Solution: when using default setting to test trigger speed or make comparison with other cameras, please use High PIR sensitivity.
C. Camera can not recognize SIM card
Solution: Please check there is any PIN lock on SIM card. If so, please delete the lock.
D. After inserting SIM card, there is no signal bar
Solution: Please check battery power is enough or not, when searching signal server, camera need higher power.
E. After setup menu.cfg, and turn camera from OFF to TEST mode, there is no picture arrives
Solution: Please turn camera from OFF to TEST mode first, then camera will read menu.cfg, after camera recognizes SIM card and get 3 or 4 signal bar and operator, then please turn to ON mode.
F. in too cold weather, please use LOW PIR sensitivity, if temperature is close to 37℃，please use HIGH PIR sensitity
G. when testing sending picture out on Test mode, please make sure the signal is 3 bars or 4 bars
H. when connecting with power, test mode, red LED blinks, and screen can not be on, please let camera be charged for about 2min, then replace AA batteries or plug OFF and plus in DC power. Capacitor needs to be charged before working, when it is with no power.